News · By Chris Vogel · Published · Sources listed at the end
The electrical code may get its first plug-in solar rules: comments open until November 20
For the first time, the National Electrical Code may get rules for plug-in solar. Six proposed amendments, published October 22, 2026, would define plug-in systems and how to connect them. Public comments are open until November 20. Nothing changes for buyers yet.
What happened
On October 22, 2026, the National Fire Protection Association, which publishes the National Electrical Code (NEC), released six proposed amendments about plug-in solar for public comment. In code language they’re Tentative Interim Amendments, numbers 1951 through 1956 to NFPA 70. Anyone can comment until November 20, 2026.
All six were filed by GismoPower, a company that makes plug-in solar carports, and were backed by two engineers who helped write the main US solar safety standards decades ago. Keep in mind that the proposals come from a company with a stake in the market.
Why it matters
Today the NEC, the rulebook electricians and inspectors follow across most of the US, has no definition for plug-in solar at all. The state laws, including the ones in California and Colorado, say a kit has to follow the electrical code, but the code itself doesn’t mention plug-in systems. An inspector has nothing to point to.
The product side is already moving: UL 3700 covers the safety of the equipment itself. These amendments would cover the installation side: a defined term, the kind of outlet to use, a disconnect, a label, how to check the load on a circuit and when to notify the utility.
One notable difference from the state laws
Almost every state law, and the new federal bill, defines plug-in solar by a wattage cap, usually 1,200 W, on a standard 120-volt outlet. The proposed amendments deliberately don’t use a single wattage limit. Instead they tie the allowed output to the circuit and the panel it connects to, with separate limits for 120-volt and 240-volt connections.
That approach is more technical but closer to how electricians already size circuits. It also ties in with a debate in safety committees about whether larger plug-in systems should need changes to home wiring by a licensed electrician.
What it means for you
Nothing changes for buyers today. Tentative Interim Amendments go through review and a vote before they take effect, and states adopt new NEC editions on their own schedules. If you’re planning a kit, the rules that apply are still your state’s law and the certification it asks for. Where it’s legal.
If you want a say: the six proposals are posted on NFPA’s NFPA 70 page under Tentative Interim Amendments. Each is short, and comments can come from homeowners and renters as well as electricians and engineers.
Quick answers
Does the National Electrical Code cover plug-in solar?
Not yet. None of the current NEC editions (2020, 2023, 2026) define plug-in solar. Six proposed amendments published on October 22, 2026 would add a definition and installation rules.
When is the deadline to comment on the plug-in solar NEC amendments?
November 20, 2026. The proposals are Tentative Interim Amendments 1951 to 1956 to NFPA 70, posted on NFPA’s website.
Will I need an electrician for balcony solar?
In most states with a plug-in law, you can plug in a certified kit yourself. Whether larger systems should need wiring changes is being debated in safety committees, and the proposed NEC amendments would tie allowed output to your circuit.
More straight answers in the balcony solar FAQ.
Sources
- pv magazine USA, Our national electrical code has no definition for plug-in solar: six amendments would give it one (opinion by the amendments’ filer), October 28, 2026.
- NFPA, NFPA 70 Proposed TIA 1951 and TIA 1952.
- Sierra Club New Jersey, Generate solar electricity on your balcony (safety committee debate), September 2026.